Harris håndtag / torch

Sorter faldende

7 vare(r)

  1. 62-5F.1200.105 Harris Style Cutting Torch 1200mm. x 105 deg. head (Old pnr. 62-3F)-20
    1.335,00 kr

    Harris Style Cutting Torch 1200mm. x 105 deg. head - Fits Harris 6290- and LG- Multi Use

    Injector cutting blowpipe based on the traditional flat seat nozzles H6290 style cutting tips. The 62-5F style cutting blowpipe has a propane injector jet fitted ("F") so must only be used used with oxy / propane gases. The extended length is preferred for heavy industry applications, 1200mm combined with the 105 degree head angle.

     

    Inlet connections 9/16 x 18 tpi or 3/8BSP

    These blowpipes have been built with a good quality injector along with high quality flow control valves and full brass contruction to ensure this torch is suitable for the demands which will be made of it.

  2. 62-5F.1200.90 Harris Style Cutting Torch 1200mm. x 90 deg. head (Old pnr. 62-3F)-20
    1.335,00 kr

    Harris Style Cutting Torch 1200mm. x 90 deg. head - Fits Harris 6290- and LG- Multi Use

    Injector cutting blowpipe based on the traditional flat seat nozzles H6290 style cutting tips. The 62-5F style cutting blowpipe has a propane injector jet fitted ("F") so must only be used used with oxy / propane gases. The extended length is preferred for heavy industry applications, 1200mm combined with the 90 degree head angle.

     

    Inlet connections 9/16 x 18 tpi or 3/8BSP

    These blowpipes have been built with a good quality injector along with high quality flow control valves and full brass contruction to ensure this torch is suitable for the demands which will be made of it.

  3. 62-5F.500.90 Harris Style Cutting Torch 500mm. x 90 deg. head (Old pnr. 62-3F)-20
    575,00 kr

    Harris Style Cutting Torch 500mm. x 90 deg. head - Fits Harris 6290- and LG- Multi Use

    Injector cutting blowpipe based on the traditional flat seat nozzles H6290 style cutting tips. The 62-5F style cutting blowpipe has a propane injector jet fitted ("F") so must only be used used with oxy / propane gases. The extended length is preferred for heavy industry applications, 500mm combined with the 90 degree head angle.

     

    Inlet connections 9/16 x 18 tpi or 3/8BSP

    These blowpipes have been built with a good quality injector along with high quality flow control valves and full brass contruction to ensure this torch is suitable for the demands which will be made of it.

  4. 62-5F.835.105 Harris Style Cutting Torch 835mm. x 105 deg. head (Old pnr. 62-3F)-20
    850,00 kr

    Harris Style Cutting Torch 835mm. x 105 deg. head - Fits Harris 6290- and LG- Multi Use

    Injector cutting blowpipe based on the traditional flat seat nozzles H6290 style cutting tips. The 62-5F style cutting blowpipe has a propane injector jet fitted ("F") so must only be used used with oxy / propane gases. The extended length is preferred for heavy industry applications, 835mm combined with the 105 degree head angle.

     

    Inlet connections 9/16 x 18 tpi or 3/8BSP

    These blowpipes have been built with a good quality injector along with high quality flow control valves and full brass contruction to ensure this torch is suitable for the demands which will be made of it.

  5. 62-5F.835.180 Harris Style Cutting Torch 835mm. x 180 deg. head (Old pnr. 62-3F)-20
    985,00 kr

    Harris Style Cutting Torch 835mm. x 180 deg. head - Fits Harris 6290- and LG- Multi Use

    Injector cutting blowpipe based on the traditional flat seat nozzles H6290 style cutting tips. The 62-5F style cutting blowpipe has a propane injector jet fitted ("F") so must only be used used with oxy / propane gases. The extended length is preferred for heavy industry applications, 835mm combined with the 180 degree head angle.

     

    Inlet connections 9/16 x 18 tpi or 3/8BSP

    These blowpipes have been built with a good quality injector along with high quality flow control valves and full brass contruction to ensure this torch is suitable for the demands which will be made of it.

  6. 62-5F.835.70 Harris Style Cutting Torch 835mm. x 70 deg. head (Old pnr. 62-3F)-20
    922,00 kr

    Harris Style Cutting Torch 835mm. x 70 deg. head - Fits Harris 6290- and LG- Multi Use

    Injector cutting blowpipe based on the traditional flat seat nozzles H6290 style cutting tips. The 62-5F style cutting blowpipe has a propane injector jet fitted ("F") so must only be used used with oxy / propane gases. The extended length is preferred for heavy industry applications, 835mm combined with the 70 degree head angle.

     

    Inlet connections 9/16 x 18 tpi or 3/8BSP

    These blowpipes have been built with a good quality injector along with high quality flow control valves and full brass contruction to ensure this torch is suitable for the demands which will be made of it.

  7. 62-5F.835.90 Harris Style Cutting Torch 835mm. x 90 deg. head (Old pnr. 62-3F)-20
    850,00 kr

    Harris Style Cutting Torch 835mm. x 90 deg. head - Fits Harris 6290- and LG- Multi Use

    Injector cutting blowpipe based on the traditional flat seat nozzles H6290 style cutting tips. The 62-5F style cutting blowpipe has a propane injector jet fitted ("F") so must only be used used with oxy / propane gases. The extended length is preferred for heavy industry applications, 835mm combined with the 90 degree head angle.

     

    Inlet connections 9/16 x 18 tpi or 3/8BSP

    These blowpipes have been built with a good quality injector along with high quality flow control valves and full brass contruction to ensure this torch is suitable for the demands which will be made of it.

Sorter faldende

7 vare(r)